Back to Blog
Guest EditorialOumar Barry, Pierpaolo Belardinelli, Teresa Berruti, and Radu Serban J. Comput. Nonlinear Dynam. Aug 2023, 18(8): 080301 https://doi.org/10.1115/1.4062725 We are delighted to bring to the readers of the ASME Journal of Computational and Nonlinear Dynamics (JCND) a special issue dedicated to select papers from the 18th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC), held during the 2022 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering (IDETC-CIE) Conferences. In the last few years, it has become a tradition to collate such a Special Issue with some of the most interesting and relevant papers presented at MSNDC. At its 18th edition in 2022, MSNDC is the main conference in multibody dynamics and nonlinear control in the United States and provides an international venue where researchers and practitioners present an early glimpse into their highest-quality research and development. JCND was established in 2005, at the initiative of the ASME Technical Committee (TC-MSND) that is also organizing the annual MSNDC conferences. Under the steady and effective leadership of its past (Subhash C. Sinha, Ahmed Shabana, and Bala Balachandran) and current (Bogdan Epureanu) Editors-in-Chief, JCND has become a premier ASME journal which “serves as a forum for the exchange of new ideas and applications in computational dynamics, multibody system dynamics, and all aspects (analytical, numerical, and experimental) of dynamics associated with nonlinear systems.” It is in this spirit that we share with you some of the most exciting work presented at MSNDC-2022. Held as the first in-person meeting after the global Covid pandemic, the 2022 edition of the IDETC-CIE conferences took place in St. Louis, MS, August 14–17, 2022. With the world emerging from the constraints imposed by the pandemic and with travel safety and security limitations still in place, the IDETC-CIE conferences nonetheless managed to attract a relatively large number of submissions and participants. With this special issue we want to bring to the readership of JCND and to those colleagues of ours who were unable to attend the in-person conference some of the highlights of the MSNDC conference; furthermore, we hope to use this mechanism to remind the community at large of the ASME IDETC-CIE conferences and their continuing impact on the field over the years and encourage higher participation; finally, we aim to benefit JCND and its readership by presenting recent and innovative work in the core topics of the journal. Selected from the papers recommended by the conference paper reviewers and symposium organizers for the MSNDC Best Paper award, manuscripts considered for this special issue underwent the conference review process, an additional scoring for the MSNDC Best Paper competition, and finally the standard JCND review process. The twelve papers that comprise the final special issue cover a spectrum of topics central to both MSNDC and JCND. They present both theoretical and applied research, as well as both analytical and computational approaches to problems in diverse areas, ranging from frictional contact in nonlinear finite element analysis, to optimal control, nonlinear stability analysis, terramechanics, servo-controlled precision motion, swarm robotics, aerodynamic stability, and to nonlinear dynamics in atomic force microscopy. We are indeed very happy to have had the opportunity to organize this special issue. Special thanks to Prof. Bogdan I. Epureanu for giving us this opportunity and to Amy Suski for helping us greatly at every step of the process. It was great working as a team on this project and we are excited to see it come to life. Copyright © 2023 by ASME Research PapersA pnh-Adaptive Refinement Procedure for Numerical Optimal Control Problems
Lorenzo Bartali, Marco Gabiccini, Massimo Guiggiani Stability Analysis of Nonlinear Rotating Systems Using Lyapunov Characteristic Exponents Estimated From Multibody Dynamics Gianni Cassoni, Andrea Zanoni, Aykut Tamer, Pierangelo Masarati On Practical Aspects of Variational Consistency in Contact Dynamics Antonio Recuero, Alexander Lindsay Non-Smooth Dynamics of Tapping Mode Atomic Force Microscopy Pierpaolo Belardinelli, Abhilash Chandrashekar, Farbod Alijani, Stefano Lenci Stability and Bifurcation Analysis of Precision Motion Stage With Nonlinear Friction Isolator Sunit K. Gupta, Ehab E. Basta, Oumar R. Barry Vibration Analysis of a Nonlinear Absorber Coupled to a Hand-Held Impact Machine Oreoluwa Alabi, Sunit Kumar Gupta, Oumar R. Barry Real-Time Simulation of Ground Vehicles on Deformable Terrain Radu Serban, Jay Taves, Zhenhao Zhou Period-1 Motions to Twin Spiral Homoclinic Orbits in the Rössler System Siyuan Xing, Albert C. J. Luo Identification of Asymmetric Bouc–Wen Hysteresis Under Intense Noise by Only Measuring Acceleration Qinghua Liu, Junyi Cao Evaluation and Modification of Kinetic Gas Collision Theory as Applied to Encounter Rate Dynamics for Multi-Robot Groups and Robot Swarms Adam Schroeder, Glenn Lipscomb Stability Analysis of a One Degree of Freedom Robot Model With Sampled Digital Acceleration Feedback Controller in Turning and Milling Andras Bartfai, Asier Barrios, Zoltan Dombovari Comparison of the Hysteresis Response of Super-Coiled Polymer Actuators Josh H. P. Henry, Jacqueline Bridge
0 Comments
Read More
Back to Blog
JCND 2021 IDETC-CIE Spotlight Speakers8/16/2021 During 2021 IDETC-CIE, journals will have the opportunity to highlight recently published work in journal spotlight sessions. We invite you to join JCND’s session on Thursday, August 19, 2021, 1:00-3:00 PM (Eastern US). The following 7 speakers will present their invited papers:
Edward J. Haug Haug, E. J. (February 24, 2021). "Multibody Dynamics on Differentiable Manifolds." ASME. J. Comput. Nonlinear Dynam. April 2021; 16(4): 041003. https://doi.org/10.1115/1.4049995 Harry Dankowicz Dankowicz, H., Wang, Y., Schilder, F., and Henderson, M. E. (March 18, 2020). "Multidimensional Manifold Continuation for Adaptive Boundary-Value Problems." ASME. J. Comput. Nonlinear Dynam. May 2020; 15(5): 051002. https://doi.org/10.1115/1.4046498 Brian Tinsley Tinsley, B., and Shabana, A. A. (November 11, 2020). "Convergence Characteristics of Geometrically Accurate Spatial Finite Elements." ASME. J. Comput. Nonlinear Dynam. January 2021; 16(1): 011006. https://doi.org/10.1115/1.4048731 Jozsef Kovecses Peiret, A., González, F., Kövecses, J., and Teichmann, M. (February 24, 2020). "Co-Simulation of Multibody Systems With Contact Using Reduced Interface Models." ASME. J. Comput. Nonlinear Dynam. April 2020; 15(4): 041001. https://doi.org/10.1115/1.4046052 Tian Mi Mi, T., Stepan, G., Takacs, D., and Chen, N. (January 23, 2020). "Vehicle Shimmy Modeling With Pacejka's Magic Formula and the Delayed Tire Model." ASME. J. Comput. Nonlinear Dynam. March 2020; 15(3): 031005. https://doi.org/10.1115/1.4045943 Mohammad Bukhari Bukhari, M., and Barry, O. (November 11, 2019). "Exact Nonlinear Dynamic Analysis of a Beam With a Nonlinear Vibration Absorber and With Various Boundary Conditions." ASME. J. Comput. Nonlinear Dynam. January 2020; 15(1): 011003. https://doi.org/10.1115/1.4045287 Jan Kraft Meyer, T., Kraft, J., and Schweizer, B. (February 24, 2021). "Co-Simulation: Error Estimation and Macro-Step Size Control." ASME. J. Comput. Nonlinear Dynam. April 2021; 16(4): 041002. https://doi.org/10.1115/1.4048944 |